Underfloor heating calculator

The underfloor heating calculator estimates the active heated area, installed electric power and thermostat zones. It is useful before buying heating mats, cable kits or checking whether the room needs one or several control zones.

Do not heat under fixed cabinets, bathtubs or heavy built-in furniture. Adjust the heated-area percentage to reflect the free floor area.

  1. Enter room dimensions
  2. Set the free heated area percentage
  3. Choose W/m2 and reserve, then check kW and zones

What W/m2 value should I use?

Bathrooms often use 150-180 W/m2, while dry rooms can be planned around 100-150 W/m2 depending on insulation and purpose.

Why is heated area lower than room area?

Heating is normally installed only on free floor zones, not below fixed furniture or sanitary equipment.

Does this replace an electrical design?

No. It is a planning estimate. Final power, cable routing and protection devices should be checked by a qualified electrician.

Useful next steps

Renovation calculators